WebSVN – php-qbpwcf – Diff – /trunk/usr/lib/qbpwcf/cmd.php



	#$conf["keepServiceUp"]="false";
	#$conf["cmd::keepServiceUp"]["checkListen"],陣列,用來判斷服務是否有正確啟動的條件,一個元素代表,其中要有一個socket info符合之,若元素的key為"ip"，則其數值為[ipv4/ipv6]:port/protocol(tcp/udp);若元素的key為"addr",則其數值為unix domain socket 的位置與名稱;若元素的key為"name",則其數值為程序名稱;若元素的key為"cmd",則其數值為一陣列,該陣列的key有cmd,其value為要執行的指令,另外一個key為timeout,其value為秒數,預設為10秒,代表指令於10秒內結束為正常,反之為異常.
	#$conf["cmd::keepServiceUp"]["checkListen"]=array(array("ip"=>169.254.1.1:443/tcp,"addr"=>/usr/lib/qbpwcf/qbpwcf-usock.sock,"name"=>"addr"),"name"=>"httpd");
	#$conf["cmd::keepServiceUp"]["interval"],字串,檢查沒問題後,要多少秒後再檢查一次,預設為30秒，亦即"30".
	#$conf["cmd::keepServiceUp"]["interval"]="30";
	#$conf["runAftertService"],陣列,每個元素代表要在哪個服務啟動後再運行,預設不設定.
	#$conf["runAftertService"]=array();
	#參考資料:
	#無.
	#備註:
	#無.
	*/

		#$conf["canNotBeEmpty"],字串陣列,哪些必填參數的內容不得為空字串或空陣列,僅當$conf["canBeEmptyString"]為"true"時會生效.
		#$conf["canNotBeEmpty"]=array();
		#$conf["canBeEmpty"],字串陣列,哪些必填參數的內容可為空字串或空陣列,僅當$conf["canBeEmptyString"]為"false"時會生效.
		#$conf["canBeEmpty"]=array();
		#$conf["skipableVariableCanNotBeEmpty"],字串陣列,哪些可省略參數不可以為空字串或空陣列.
		$conf["variableCheck::checkArguments"]["skipableVariableCanNotBeEmpty"]=array("params","enable","startNow","description","keepServiceUp","cmd::keepServiceUp","runAftertService");
		#$conf["skipableVariableName"],陣列字串,爲可省略參數的變數名稱陣列，形態爲陣列變數，例如: $conf["skipableVariableName"] = array("id","account","password");
		$conf["variableCheck::checkArguments"]["skipableVariableName"]=array("params","enable","startNow","description","keepServiceUp","cmd::keepServiceUp","runAftertService");
		#$conf["skipableVariableType"],陣列字串,爲可省略參數的變數名稱陣列，形態爲陣列變數，例如: $conf["skipableVariableType"] = array("string",integer,"double");
		$conf["variableCheck::checkArguments"]["skipableVariableType"]=array("array","string","string","string","string","array","array");
		#$conf["skipableVarDefaultValue"],字串陣列,每個不存在的可省略變數要初始化為什麼,null與代表不指定,若預設值是參數之一，請將$c)onf["mustBeFilledVar"]改成"\$conf["\mustBeFilledVar\"]".
		$conf["variableCheck::checkArguments"]["skipableVarDefaultValue"]=array(null,"true","true","service description.","false",null,null);
		#$conf["disallowAllSkipableVarIsEmpty"],字串,是否允許每個可省略參數都為空字串,預設為"true"允許,反之為"false".

		$serviceFileContent[]="";
 
		#設置要在哪些服務啟動後再啟動
		$afterServiceStr="After=network-pre.target dbus.service network.target network.service httpd.service";
 
		#如果有設置runAftertService
		if(isset($conf["runAftertService"])){
		
			#將其轉存成用空格間隔的字串
			#函式說明:
			#將一維陣列轉換為用特定符號間隔的字串,ex:array("1","2","3") to "a;b;c;".
			#回傳的結果:

			#$result["error"],錯誤訊息陣列.
			#$result["content"],處理好的字串.
			#$result["argu"],使用的參數.
			#必填參數:
			#$conf["inputArray"],字串陣列,要轉成字串的一維陣列.
			$conf["arrays::arrayToString"]["inputArray"]=$conf["runAftertService"];
			#可省略參數:
			#$conf["spiltSymbol"],字串,用來區隔字串的符號,預設為;
			$conf["arrays::arrayToString"]["spiltSymbol"]=" ";
			#$conf["skipEnd"],字串,結尾是否不要加上符號,預設為"false",要加上符號,"true"代表不要加上符號。
			$conf["arrays::arrayToString"]["skipEnd"]="true";

Rev 383	Rev 387
Line 26021...	Line 26021...
26021	`#$conf["keepServiceUp"]="false";`	26021	`#$conf["keepServiceUp"]="false";`
26022	#$conf["cmd::keepServiceUp"]["checkListen"],陣列,用來判斷服務是否有正確啟動的條件,一個元素代表,其中要有一個socket info符合之,若元素的key為"ip"，則其數值為[ipv4/ipv6]:port/protocol(tcp/udp);若元素的key為"addr",則其數值為unix domain socket 的位置與名稱;若元素的key為"name",則其數值為程序名稱;若元素的key為"cmd",則其數值為一陣列,該陣列的key有cmd,其value為要執行的指令,另外一個key為timeout,其value為秒數,預設為10秒,代表指令於10秒內結束為正常,反之為異常.	26022	#$conf["cmd::keepServiceUp"]["checkListen"],陣列,用來判斷服務是否有正確啟動的條件,一個元素代表,其中要有一個socket info符合之,若元素的key為"ip"，則其數值為[ipv4/ipv6]:port/protocol(tcp/udp);若元素的key為"addr",則其數值為unix domain socket 的位置與名稱;若元素的key為"name",則其數值為程序名稱;若元素的key為"cmd",則其數值為一陣列,該陣列的key有cmd,其value為要執行的指令,另外一個key為timeout,其value為秒數,預設為10秒,代表指令於10秒內結束為正常,反之為異常.
26023	`#$conf["cmd::keepServiceUp"]["checkListen"]=array(array("ip"=>169.254.1.1:443/tcp,"addr"=>/usr/lib/qbpwcf/qbpwcf-usock.sock,"name"=>"addr"),"name"=>"httpd");`	26023	`#$conf["cmd::keepServiceUp"]["checkListen"]=array(array("ip"=>169.254.1.1:443/tcp,"addr"=>/usr/lib/qbpwcf/qbpwcf-usock.sock,"name"=>"addr"),"name"=>"httpd");`
26024	`#$conf["cmd::keepServiceUp"]["interval"],字串,檢查沒問題後,要多少秒後再檢查一次,預設為30秒，亦即"30".`	26024	`#$conf["cmd::keepServiceUp"]["interval"],字串,檢查沒問題後,要多少秒後再檢查一次,預設為30秒，亦即"30".`
26025	`#$conf["cmd::keepServiceUp"]["interval"]="30";`	26025	`#$conf["cmd::keepServiceUp"]["interval"]="30";`
26026	`#$conf["runAfertService"],陣列,每個元素代表要在哪個服務啟動後再運行,預設不設定.`	26026	`#$conf["runAftertService"],陣列,每個元素代表要在哪個服務啟動後再運行,預設不設定.`
26027	`#$conf["runAfertService"]=array();`	26027	`#$conf["runAftertService"]=array();`
26028	`#參考資料:`	26028	`#參考資料:`
26029	`#無.`	26029	`#無.`
26030	`#備註:`	26030	`#備註:`
26031	`#無.`	26031	`#無.`
26032	`*/`	26032	`*/`
Line 26092...	Line 26092...
26092	`#$conf["canNotBeEmpty"],字串陣列,哪些必填參數的內容不得為空字串或空陣列,僅當$conf["canBeEmptyString"]為"true"時會生效.`	26092	`#$conf["canNotBeEmpty"],字串陣列,哪些必填參數的內容不得為空字串或空陣列,僅當$conf["canBeEmptyString"]為"true"時會生效.`
26093	`#$conf["canNotBeEmpty"]=array();`	26093	`#$conf["canNotBeEmpty"]=array();`
26094	`#$conf["canBeEmpty"],字串陣列,哪些必填參數的內容可為空字串或空陣列,僅當$conf["canBeEmptyString"]為"false"時會生效.`	26094	`#$conf["canBeEmpty"],字串陣列,哪些必填參數的內容可為空字串或空陣列,僅當$conf["canBeEmptyString"]為"false"時會生效.`
26095	`#$conf["canBeEmpty"]=array();`	26095	`#$conf["canBeEmpty"]=array();`
26096	`#$conf["skipableVariableCanNotBeEmpty"],字串陣列,哪些可省略參數不可以為空字串或空陣列.`	26096	`#$conf["skipableVariableCanNotBeEmpty"],字串陣列,哪些可省略參數不可以為空字串或空陣列.`
26097	`$conf["variableCheck::checkArguments"]["skipableVariableCanNotBeEmpty"]=array("params","enable","startNow","description","keepServiceUp","cmd::keepServiceUp","runAfertService");`	26097	`$conf["variableCheck::checkArguments"]["skipableVariableCanNotBeEmpty"]=array("params","enable","startNow","description","keepServiceUp","cmd::keepServiceUp","runAftertService");`
26098	`#$conf["skipableVariableName"],陣列字串,爲可省略參數的變數名稱陣列，形態爲陣列變數，例如: $conf["skipableVariableName"] = array("id","account","password");`	26098	`#$conf["skipableVariableName"],陣列字串,爲可省略參數的變數名稱陣列，形態爲陣列變數，例如: $conf["skipableVariableName"] = array("id","account","password");`
26099	`$conf["variableCheck::checkArguments"]["skipableVariableName"]=array("params","enable","startNow","description","keepServiceUp","cmd::keepServiceUp","runAfertService");`	26099	`$conf["variableCheck::checkArguments"]["skipableVariableName"]=array("params","enable","startNow","description","keepServiceUp","cmd::keepServiceUp","runAftertService");`
26100	`#$conf["skipableVariableType"],陣列字串,爲可省略參數的變數名稱陣列，形態爲陣列變數，例如: $conf["skipableVariableType"] = array("string",integer,"double");`	26100	`#$conf["skipableVariableType"],陣列字串,爲可省略參數的變數名稱陣列，形態爲陣列變數，例如: $conf["skipableVariableType"] = array("string",integer,"double");`
26101	`$conf["variableCheck::checkArguments"]["skipableVariableType"]=array("array","string","string","string","string","array","array");`	26101	`$conf["variableCheck::checkArguments"]["skipableVariableType"]=array("array","string","string","string","string","array","array");`
26102	`#$conf["skipableVarDefaultValue"],字串陣列,每個不存在的可省略變數要初始化為什麼,null與代表不指定,若預設值是參數之一，請將$c)onf["mustBeFilledVar"]改成"\$conf["\mustBeFilledVar\"]".`	26102	`#$conf["skipableVarDefaultValue"],字串陣列,每個不存在的可省略變數要初始化為什麼,null與代表不指定,若預設值是參數之一，請將$c)onf["mustBeFilledVar"]改成"\$conf["\mustBeFilledVar\"]".`
26103	`$conf["variableCheck::checkArguments"]["skipableVarDefaultValue"]=array(null,"true","true","service description.","false",null,null);`	26103	`$conf["variableCheck::checkArguments"]["skipableVarDefaultValue"]=array(null,"true","true","service description.","false",null,null);`
26104	`#$conf["disallowAllSkipableVarIsEmpty"],字串,是否允許每個可省略參數都為空字串,預設為"true"允許,反之為"false".`	26104	`#$conf["disallowAllSkipableVarIsEmpty"],字串,是否允許每個可省略參數都為空字串,預設為"true"允許,反之為"false".`
Line 26153...	Line 26153...
26153	`$serviceFileContent[]="";`	26153	`$serviceFileContent[]="";`
26154		26154
26155	`#設置要在哪些服務啟動後再啟動`	26155	`#設置要在哪些服務啟動後再啟動`
26156	`$afterServiceStr="After=network-pre.target dbus.service network.target network.service httpd.service";`	26156	`$afterServiceStr="After=network-pre.target dbus.service network.target network.service httpd.service";`
26157		26157
26158	`#如果有設置runAfertService`	26158	`#如果有設置runAftertService`
26159	`if(isset($conf["runAfertService"])){`	26159	`if(isset($conf["runAftertService"])){`
26160		26160
26161	`#將其轉存成用空格間隔的字串`	26161	`#將其轉存成用空格間隔的字串`
26162	`#函式說明:`	26162	`#函式說明:`
26163	`#將一維陣列轉換為用特定符號間隔的字串,ex:array("1","2","3") to "a;b;c;".`	26163	`#將一維陣列轉換為用特定符號間隔的字串,ex:array("1","2","3") to "a;b;c;".`
26164	`#回傳的結果:`	26164	`#回傳的結果:`
Line 26167...	Line 26167...
26167	`#$result["error"],錯誤訊息陣列.`	26167	`#$result["error"],錯誤訊息陣列.`
26168	`#$result["content"],處理好的字串.`	26168	`#$result["content"],處理好的字串.`
26169	`#$result["argu"],使用的參數.`	26169	`#$result["argu"],使用的參數.`
26170	`#必填參數:`	26170	`#必填參數:`
26171	`#$conf["inputArray"],字串陣列,要轉成字串的一維陣列.`	26171	`#$conf["inputArray"],字串陣列,要轉成字串的一維陣列.`
26172	`$conf["arrays::arrayToString"]["inputArray"]=array();`	26172	`$conf["arrays::arrayToString"]["inputArray"]=$conf["runAftertService"];`
26173	`#可省略參數:`	26173	`#可省略參數:`
26174	`#$conf["spiltSymbol"],字串,用來區隔字串的符號,預設為;`	26174	`#$conf["spiltSymbol"],字串,用來區隔字串的符號,預設為;`
26175	`$conf["arrays::arrayToString"]["spiltSymbol"]=" ";`	26175	`$conf["arrays::arrayToString"]["spiltSymbol"]=" ";`
26176	`#$conf["skipEnd"],字串,結尾是否不要加上符號,預設為"false",要加上符號,"true"代表不要加上符號。`	26176	`#$conf["skipEnd"],字串,結尾是否不要加上符號,預設為"false",要加上符號,"true"代表不要加上符號。`
26177	`$conf["arrays::arrayToString"]["skipEnd"]="true";`	26177	`$conf["arrays::arrayToString"]["skipEnd"]="true";`

Subversion Repositories php-qbpwcf

(root)/trunk/usr/lib/qbpwcf/cmd.php – Rev 383 → 387